TECNO I IN5 CAMON HIOS MT6735/MT6737T LOCKED with CERT PATTERN LOCK & FRP REM

P

Prince

Registered
Nov 25, 2017
311
0
32
[font=verdana, geneva, lucida,]SUCCESSFULLY REMOVE PARRERN LOCK & FRP (TECNO IN5 CAMON HIOS MT6735/MT6737T LOCKED with CERT)USB[/font][font=verdana, geneva, lucida,] [/font]


[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]

[font=verdana, geneva, lucida,][DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error![/font]

[font=verdana, geneva, lucida,]Operation Failed[/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:23[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]NEED TO CHANGE DA FILE IN BOOT FOLDER[/font]

[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,][AP] : Initial info read Ok![/font]

[font=verdana, geneva, lucida,]Brand : TECNO
ProdName : Camon I
ProdModel : TECNO IN5
Device : Camon I
AndroidVer: 7.0
MTKxCPU : MT6737T[/font]


[font=verdana, geneva, lucida,]SECURITY : [/font]
[font=verdana, geneva, lucida,]IMEI_SW [1] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]IMEI_SW [2] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]BTMAC Addr : xxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]WiFi MAC : xxxxxxx[/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:16[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Format FileSystem [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,]Clear FRP ( Google Reset Protection )[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear DIN[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear USERDATA[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear CACHE[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:39[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable! [/font]

[font=verdana, geneva, lucida,]THANKS INFINITY-BOX TEAM[/font]
 
A

aravind

Registered
Mar 6, 2018
3
0
Prince said:
[font=verdana, geneva, lucida,]SUCCESSFULLY REMOVE PARRERN LOCK & FRP (TECNO IN5 CAMON HIOS MT6735/MT6737T LOCKED with CERT)USB[/font][font=verdana, geneva, lucida,] [/font]


[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]

[font=verdana, geneva, lucida,][DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error![/font]

[font=verdana, geneva, lucida,]Operation Failed[/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:23[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]NEED TO CHANGE DA FILE IN BOOT FOLDER[/font]

[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,][AP] : Initial info read Ok![/font]

[font=verdana, geneva, lucida,]Brand : TECNO
ProdName : Camon I
ProdModel : TECNO IN5
Device : Camon I
AndroidVer: 7.0
MTKxCPU : MT6737T[/font]


[font=verdana, geneva, lucida,]SECURITY : [/font]
[font=verdana, geneva, lucida,]IMEI_SW [1] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]IMEI_SW [2] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]BTMAC Addr : xxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]WiFi MAC : xxxxxxx[/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:16[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Format FileSystem [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,]Clear FRP ( Google Reset Protection )[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear DIN[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear USERDATA[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear CACHE[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:39[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable! [/font]

[font=verdana, geneva, lucida,]THANKS INFINITY-BOX TEAM[/font]
Click to expand...

bro i need da file
 
G

GsmAnex

Registered
Feb 21, 2018
367
1
aravind said:
Prince said:
[font=verdana, geneva, lucida,]SUCCESSFULLY REMOVE PARRERN LOCK & FRP (TECNO IN5 CAMON HIOS MT6735/MT6737T LOCKED with CERT)USB[/font][font=verdana, geneva, lucida,] [/font]


[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]

[font=verdana, geneva, lucida,][DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error![/font]

[font=verdana, geneva, lucida,]Operation Failed[/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:23[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]NEED TO CHANGE DA FILE IN BOOT FOLDER[/font]

[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,][AP] : Initial info read Ok![/font]

[font=verdana, geneva, lucida,]Brand : TECNO
ProdName : Camon I
ProdModel : TECNO IN5
Device : Camon I
AndroidVer: 7.0
MTKxCPU : MT6737T[/font]


[font=verdana, geneva, lucida,]SECURITY : [/font]
[font=verdana, geneva, lucida,]IMEI_SW [1] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]IMEI_SW [2] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]BTMAC Addr : xxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]WiFi MAC : xxxxxxx[/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:16[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Format FileSystem [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,]Clear FRP ( Google Reset Protection )[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear DIN[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear USERDATA[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear CACHE[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:39[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable! [/font]

[font=verdana, geneva, lucida,]THANKS INFINITY-BOX TEAM[/font]
Click to expand...

bro i need da file
Click to expand...

i have the DA file here .. i will share for you later
 
G

GsmAnex

Registered
Feb 21, 2018
367
1
aravind said:
thanks bro i am waiting for file
Click to expand...

Pending the time is waiting for me, I am on vacation so it may take a while, you may contact +2348069526221 that is the man I bought it from.. he may request for money because I paid him also...
 
C

cino22

Registered
Mar 11, 2018
1
0
GsmAnex said:
aravind said:
thanks bro i am waiting for file
Click to expand...

Pending the time is waiting for me, I am on vacation so it may take a while, you may contact +2348069526221 that is the man I bought it from.. he may request for money because I paid him also...
Click to expand...

this is totally wrong sir. if this site is for a selfish set of group i wont come here again...
gsm forum gives  info free. but you sale yours
 
E

elasunuas

Registered
Jan 24, 2018
3
0
GsmAnex said:
aravind said:
Prince said:
[font=verdana, geneva, lucida,]SUCCESSFULLY REMOVE PARRERN LOCK & FRP (TECNO IN5 CAMON HIOS MT6735/MT6737T LOCKED with CERT)USB[/font][font=verdana, geneva, lucida,] [/font]


[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]

[font=verdana, geneva, lucida,][DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error![/font]

[font=verdana, geneva, lucida,]Operation Failed[/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:23[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]NEED TO CHANGE DA FILE IN BOOT FOLDER[/font]

[font=verdana, geneva, lucida,]Operation : Check / Read Info [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,][AP] : Initial info read Ok![/font]

[font=verdana, geneva, lucida,]Brand : TECNO
ProdName : Camon I
ProdModel : TECNO IN5
Device : Camon I
AndroidVer: 7.0
MTKxCPU : MT6737T[/font]


[font=verdana, geneva, lucida,]SECURITY : [/font]
[font=verdana, geneva, lucida,]IMEI_SW [1] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]IMEI_SW [2] : xxxxxxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]BTMAC Addr : xxxxxxxxxxxx[/font]
[font=verdana, geneva, lucida,]WiFi MAC : xxxxxxx[/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:16[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable![/font]
[font=verdana, geneva, lucida,]================================================== ============================================[/font]
[font=verdana, geneva, lucida,]Operation : Format FileSystem [ v1.58 ][/font]

[font=verdana, geneva, lucida,]1. Power Off Phone , Remove battery , Insert back[/font]
[font=verdana, geneva, lucida,]2. Insert USB cable. In some cases require hold BootKey[/font]

[font=verdana, geneva, lucida,]Wait for phone...[/font]
[font=verdana, geneva, lucida,]Phone found! [ 23 ][/font]
[font=verdana, geneva, lucida,]Sync...[/font]
[font=verdana, geneva, lucida,]Inital Boot Ok![/font]
[font=verdana, geneva, lucida,]BB_CPU_PID : 6735[/font]
[font=verdana, geneva, lucida,]BB_CPU_NME : [MediaTek] MT6735_S00[/font]
[font=verdana, geneva, lucida,]BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000[/font]
[font=verdana, geneva, lucida,]Processing BROM stage[/font]
[font=verdana, geneva, lucida,]Settings for BROM configured![/font]
[font=verdana, geneva, lucida,]SecCfgVal : 0x05000000[/font]
[font=verdana, geneva, lucida,]BromVer : 0x00FF[/font]
[font=verdana, geneva, lucida,]BLVersion : 0x0001[/font]
[font=verdana, geneva, lucida,]PreLoader : Active [ Boot with PL ][/font]
[font=verdana, geneva, lucida,]BootLdrSS : LOCKED with CERT[/font]
[font=verdana, geneva, lucida,]Processing DA stage[/font]
[font=verdana, geneva, lucida,]DA Select done, will use MTK_AllInOne_DA_v3.3001.2017/11/28.11:39_386299[/font]
[font=verdana, geneva, lucida,]Sending and initialize DA ...[/font]
[font=verdana, geneva, lucida,]Running DA ver.4.2 on BBID : 0x9B[/font]
[font=verdana, geneva, lucida,]NAND Flash : NOT INSTALLED[/font]
[font=verdana, geneva, lucida,]eMMC Flash : 484A0190613447427BC7A53289A187A6[/font]
[font=verdana, geneva, lucida,]Initialize Memory ... [/font]
[font=verdana, geneva, lucida,]DRAM already initialized by Preloader[/font]
[font=verdana, geneva, lucida,]DAgent sent , init HW now[/font]
[font=verdana, geneva, lucida,]eMMC FlashIC initialized[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_VEN : 0x90 , OEM : 014A[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_INF : [HYNIX] , 2a4GB[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_CID : 90014A484247346132A5C77BA687B489[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_LEN : 0x0000000747C00000[/font]
[font=verdana, geneva, lucida,][eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB][/font]
[font=verdana, geneva, lucida,]DEV RID : 0xFD096D458D16D8EE76805B2667EE35CE[/font]
[font=verdana, geneva, lucida,]INT RAM : 0x00020000[/font]
[font=verdana, geneva, lucida,]EXT RAM : 0xC0000000 [3 GiB][/font]
[font=verdana, geneva, lucida,]BOOT TYPE : EMMC_FLASH_BOOT[/font]
[font=verdana, geneva, lucida,]SOC VERIFY : C1[/font]
[font=verdana, geneva, lucida,]Boot Ok![/font]

[font=verdana, geneva, lucida,]Clear FRP ( Google Reset Protection )[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear DIN[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear USERDATA[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]
[font=verdana, geneva, lucida,]Clear CACHE[/font]
[font=verdana, geneva, lucida,]Clear Ok![/font]

[font=verdana, geneva, lucida,]Done![/font]
[font=verdana, geneva, lucida,]Elapsed: 00:00:39[/font]
[font=verdana, geneva, lucida,]Reconnect Power/Cable! [/font]

[font=verdana, geneva, lucida,]THANKS INFINITY-BOX TEAM[/font]
Click to expand...

bro i need da file
Click to expand...

i have the DA file here .. i will share for you later

Hum not free it's a premium DA File and it's paid service you will continue losing work that require this DA file contact him for price
Click to expand...
 
G

GsmAnex

Registered
Feb 21, 2018
367
1
yes if we are to share something free sometimes it spoil gsm market , all other people that works in there home , in UK and Bangladesh etc .. an some people over there in Nigeria they.. they will spoil market for US
 
You must log in or register to reply here.

GSM Nigeria Forum by GSM Nigeria  2009 |  2019 Engr. Dearlex - GSM Palace. 
Dedicated forum for the GSM community!
- GSM Nigeria Forum.  2004-2007 - 2009-2012 - 2014-2015 - 2019 -  !