1. Write Combination frome HERE
2. Use octopus to unlock frp via UART
3. Reflash stock firmware
4. Done.
Welcome to Octoplus Box Samsung software version 2.9.2
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-T585
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.9.2 Software version.
2. Use octopus to unlock frp via UART
3. Reflash stock firmware
4. Done.
Welcome to Octoplus Box Samsung software version 2.9.2
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-T585
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.9.2 Software version.
