SAMSUNG SM-B360E SIM UNLOCK DONE
AFTER FLASH DISPLAY PROBLAM DONE
IMEI 0000000
NO SERVICE DONE WITH THIS FLASH FILE AND NV FILE
FLASH FILE
https://drive.google.com/open?id=0B9...VRocy16djh3OGM
NV FILE https://drive.google.com/open?id=0B9...kZ0alJtUmhfTkk
10000000000000% TESTED
Platform: Samsung Spreadtrum
Selected port: COM4
Selected model: SM-B360E
Selected port: USB
To connect SM-B360E phone perform the following steps:
1. Disconnect phone battery.
2. Press and hold "1" button, connect USB cable.
3. Connect battery.
Connecting...
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing User section...
User section has been written successfully.
Writing Res section...
Res section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing DSP section...
DSP section has been written successfully.
Writing HDISK section...
HDISK section has been written successfully.
Writing UDISK section...
UDISK section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.2 Software version.
Platform: Samsung Spreadtrum
Selected port: COM4
Selected model: SM-B360E
Selected port: USB
To connect SM-B360E phone perform the following steps:
1. Disconnect phone battery.
2. Press and hold "1" button, connect USB cable.
3. Connect battery.
Connecting...
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Writing NV section...
NV section successfully writed.
Performed by 2.4.2 Software version.
PRESS THANKS BUTTON PLS..
