Oppo R1s R8007 Unbrick Tools & Firmware & Guide
Guide - How To Unbrick
This guide works better on Windows XP
Hello everyone, I am writing the guide in order to make the unbrick of your Oppo R8007 .
So first you need to put the phone in download mode.
Note: Make sure your device has at least 70% battery. Charge it for an hour or so if you are not sure about the amount of battery left.
Note 2: I'll assume you are an admin of the computer you are using.
1) Disconnect your device from your charger/computer, etc.
2) hold the Power+Volume Up buttons and plug it into the computer.
3) Release your hands, and go to Device Manager. (How to go to device manager below)
5) Under Ports, you'll see either QHSUSB_BULK or Qualcomm 9006/9008
If you don't see any of the three, you're doing it wrong (Probably).
If you're not seeing it, try connecting your device without the battery.
Next, we uninstall the drivers. Simple enough.
WARNING: This part is only for people seeing Qualcomm 9006/9008 in Device Manager.
1) Uninstall the driver. (Right click your device, then click Uninstall. If prompted, delete driver software too)
2) Unplug your device.
3) hold the Power+Volume Up buttons and plug it into the computer.
5) Release your hands, and go to Device Manager.
You should see QHSUSB_BULK, if not, you might be doing it wrong.
Now we install the proper drivers.
NOTE: You should be seeing QHSUSB_BULK in your Device Manager, if not you're doing it wrong.
1) Download the Drivers from my zip and unzip the file anywhere.
2) Right click on your device showing QHSUSB_BULK and click on Update Driver Software.
3) Click on "Browse my computer for driver software", and select the folder in which you extracted the drivers to.
4) It will install automatically. If prompted, click on Install the driver anyway.
After installing, your device should say Qualcomm 9006/9008.
The moment all of you have been waiting for. Unbrick!
NOTE: Your device should be connected at all times.
1) Download the tool from my zip.
2) Extract the contents from the zip file.
3) Open the .exe file with admin rights 13095DownloadTool.exe
4) There should be a line that is visibly different from others, like Com… and press on start. Now the program starting to communicate with your phone( you will see some string that becoming green), and after some second the program will close. Restart the program and now you will see a string like AAA…, so you don’t have to press start but you have to close the program. Now open the other program Msm8x26DownloadTool.exe and you will see again AAA…. And you can click on start.
5) If there is, click start and wait till that line turns green. (It takes a few minutes. Generally, nothing should go wrong at this stage.) If there isn't, you're doing it wrong.
6) After the line turns green, unplug your device and hold the power button until you see the Oppo logo.
7) If all goes well, you should be booted to ColourOS Oppo R8007.
If you want the R8006 version you have to put the R8006 firmware on the phone and update it with the phone.
If everything went through smoothly, you should be unbricked.
Download - Oppo R1s R8007 Unbrick Tools & Firmware
Password - gsmdevelopers.com
Guide - How To Unbrick
This guide works better on Windows XP
Hello everyone, I am writing the guide in order to make the unbrick of your Oppo R8007 .
So first you need to put the phone in download mode.
Note: Make sure your device has at least 70% battery. Charge it for an hour or so if you are not sure about the amount of battery left.
Note 2: I'll assume you are an admin of the computer you are using.
1) Disconnect your device from your charger/computer, etc.
2) hold the Power+Volume Up buttons and plug it into the computer.
3) Release your hands, and go to Device Manager. (How to go to device manager below)
- Click the start menu
- Right click Computer (Right hand side)
- Click Properties
- On the left hand side, click on Device Manager
5) Under Ports, you'll see either QHSUSB_BULK or Qualcomm 9006/9008
If you don't see any of the three, you're doing it wrong (Probably).
If you're not seeing it, try connecting your device without the battery.
Next, we uninstall the drivers. Simple enough.
WARNING: This part is only for people seeing Qualcomm 9006/9008 in Device Manager.
1) Uninstall the driver. (Right click your device, then click Uninstall. If prompted, delete driver software too)
2) Unplug your device.
3) hold the Power+Volume Up buttons and plug it into the computer.
5) Release your hands, and go to Device Manager.
You should see QHSUSB_BULK, if not, you might be doing it wrong.
Now we install the proper drivers.
NOTE: You should be seeing QHSUSB_BULK in your Device Manager, if not you're doing it wrong.
1) Download the Drivers from my zip and unzip the file anywhere.
2) Right click on your device showing QHSUSB_BULK and click on Update Driver Software.
3) Click on "Browse my computer for driver software", and select the folder in which you extracted the drivers to.
4) It will install automatically. If prompted, click on Install the driver anyway.
After installing, your device should say Qualcomm 9006/9008.
The moment all of you have been waiting for. Unbrick!
NOTE: Your device should be connected at all times.
1) Download the tool from my zip.
2) Extract the contents from the zip file.
3) Open the .exe file with admin rights 13095DownloadTool.exe
4) There should be a line that is visibly different from others, like Com… and press on start. Now the program starting to communicate with your phone( you will see some string that becoming green), and after some second the program will close. Restart the program and now you will see a string like AAA…, so you don’t have to press start but you have to close the program. Now open the other program Msm8x26DownloadTool.exe and you will see again AAA…. And you can click on start.
5) If there is, click start and wait till that line turns green. (It takes a few minutes. Generally, nothing should go wrong at this stage.) If there isn't, you're doing it wrong.
6) After the line turns green, unplug your device and hold the power button until you see the Oppo logo.
7) If all goes well, you should be booted to ColourOS Oppo R8007.
If you want the R8006 version you have to put the R8006 firmware on the phone and update it with the phone.
If everything went through smoothly, you should be unbricked.
Download - Oppo R1s R8007 Unbrick Tools & Firmware
Password - gsmdevelopers.com
