iTel 1508 Touch Not Working After Flash Fixed
On this page, i will share you how to fix iTel iT1508 Touch Screen or White screen After flash
Download iTel iT1508 Firmware (Stock ROM) from below direct link. File contains Firmware, Flash Tool and instruction. The file below are zipped, so you need to extract any of them using
Winrar or
7zip. There are a lot of different ROMs out there, and if you’re looking for Official, FREE FlashFile For Your iTel 1508
For some new users don’t know how to flash iTel 1508 ROM, This tutorial shows below the whole process.
Take a Backup of your personal data before flashing or installing the firmware on your smartphone.
As this helps you to recover the personal data whenever anything wrong happen.
At first you need download the below file to a new folder and remember the location, extract them Requirements: Your Android Smartphone should have at least 20-50 percent of battery before performing flash.
Here’s the iTel iT1508 Touch Not Work File Fix
iTEL 1508 Touch Not Work After Flash
iT1508-C160-TSL-111-1107
4shared link
https://www.4shared.com/rar/UcsATonLei/_USUnlokercom__iT1508-C160-.html
Mediafire link
http://www.mediafire.com/file/cjsoe1yhfvhzjed/Itel_IT1508_C160_TSL_111_1107_Touchpad_Fix.zip
HOW TO FLASH iTel 1508 Touch / White Screen After Flash ?
The below tutorial only works with the Stock firmware or Custom Rom which comes with the .Pac file in it (basically SpreadTrum devices).
Requirement:
Your device stock ROM
ResearchDownload / UpgradeDownload (Latest version)
Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Download the Above Firmware.
Now, open UpgradeDownload.exe.
Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .Pac file (Stock ROM which comes as .Pac).
Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.
Disclaimer: ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
