How to root & Unlock J3 Emerge SM-J327P PL1 and above

[GsmAnex]

[font=Verdana, Arial, Helvetica, sans-serif]DISCLAMER: Rooting the device will void the phone warranty, by following these steps you accepting it.[/font]
 
 
[font=Verdana, Arial, Helvetica, sans-serif]1.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Go to Settings > About device > scroll to bottom and tap "Build number" 8 times, now press back button once and tap developer options.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]2.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Enable [/font][font=Verdana, Arial, Helvetica, sans-serif]USB debugging[/font][font=Verdana, Arial, Helvetica, sans-serif] and [/font][font=Verdana, Arial, Helvetica, sans-serif]OEM unlock[/font][font=Verdana, Arial, Helvetica, sans-serif] (if available as option, else skip this step) from developer options.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]3.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Pull the battery out from phone, wait 10 seconds, insert the battery back in the phone.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]4.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Connect the phone to the PC and copy [/font][font=Verdana, Arial, Helvetica, sans-serif]SuperSU-v2.79-201612051815.zip[/font][font=Verdana, Arial, Helvetica, sans-serif] in your J3 Emerge sdcard root: [/font][font=Verdana, Arial, Helvetica, sans-serif]Computer\Galaxy J3 Emerge\Phone[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]5.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Power off phone completely.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]6.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Hold HOME and VOLUME-(down), keep them pressed and POWER the phone on.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]7.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Press Volume+(up) when prompted to enter "Downloading Mode"[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]8.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Connect USB and wait for all drivers to finish installing.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]9.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Open Odin3.12.3 (Run as administrator), click on [/font][font=Verdana, Arial, Helvetica, sans-serif]Options[/font][font=Verdana, Arial, Helvetica, sans-serif] tab, then [/font][font=Verdana, Arial, Helvetica, sans-serif]deselect Auto Reboot[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]10.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Select [/font][font=Verdana, Arial, Helvetica, sans-serif]twrp_j327p_14317.tar[/font][font=Verdana, Arial, Helvetica, sans-serif] in "AP" slot, then push START, the file will be flashed, wait at least 2 minutes after flash completes.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]11.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Turn the phone off by pulling out the battery, disconnect the USB cable[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]12.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Insert the battery back on the phone, then suddenly Hold HOME and VOLUME+(up), keep them pressed and POWER the phone on, phone will turn on and load recovery menu.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]13.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Wait 45 seconds / 1 minute with the phone in the recovery menu, then pull the battery out from phone.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]14.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Insert the battery back on the phone, then suddenly Hold HOME and VOLUME+(up), keep them pressed and POWER the phone on, phone will turn on and load recovery menu.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]15.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Once in TWRP recovery, swipe right to allow modifications.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]16.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Tap Install then select [/font][font=Verdana, Arial, Helvetica, sans-serif]SuperSU-v2.79-201612051815.zip[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]17.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Swipe to confirm Flash, phone is now rooted.[/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]18.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Phone will reboot, open SuperSU and disable Knox. [/font]
 
[font=Verdana, Arial, Helvetica, sans-serif]19.)[/font][font=Verdana, Arial, Helvetica, sans-serif] Proceed to unlocking [/font][font=Verdana, Arial, Helvetica, sans-serif]Click for Instructions[/font]
 
 

 

 
 
[font=Verdana, Arial, Helvetica, sans-serif]*[/font][font=Verdana, Arial, Helvetica, sans-serif]Prerequisites[/font][font=Verdana, Arial, Helvetica, sans-serif]*[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Odin3.12.3 for Windows [/font][font=Verdana, Arial, Helvetica, sans-serif]Click to Download[/font]
[font=Verdana, Arial, Helvetica, sans-serif]SuperSU-v2.79-201612051815 [/font][font=Verdana, Arial, Helvetica, sans-serif]Click to Download[/font]
[font=Verdana, Arial, Helvetica, sans-serif]twrp_j327p_14317 [/font][font=Verdana, Arial, Helvetica, sans-serif]Click to Download[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Samsung USB Drivers [/font][font=Verdana, Arial, Helvetica, sans-serif]Click to Download[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Password (if needed)=idoneapps.com[/font]