Download Xiaomi Flash Tool (All Versions)
Xiaomi Flash Compatibility Explored
Prerequisites are as follows:
Requires Windows 7 and onwards. But there have been reported some issues in Windows 8 and Windows 8.1, therefore, installing the first version of the program is extremely advised prior to the installation and updating it to a new version.
In case the user has an older version of the tool installed, they must make sure that it is uninstalled and thoroughly removed.
- Xiaomi_Flash_20181115.zip - Latest version
- Xiaomi_Flash_20180528.zip
- Xiaomi_Flash_20171212.zip
- Xiaomi_Flash_20170425.zip
- Xiaomi_Flash_20161222.zip
- Xiaomi_Flash_20160830.zip
- Xiaomi_Flash_20160401.zip
- Xiaomi_Flash_20151028.zip
- Xiaomi_Flash_20150731.zip
- Xiaomi_Flash_20150601.zip
- Xiaomi_Flash_20141117.zip
- Xiaomi_Flash_20140509.zip
Xiaomi Flash Compatibility Explored
Prerequisites are as follows:
Requires Windows 7 and onwards. But there have been reported some issues in Windows 8 and Windows 8.1, therefore, installing the first version of the program is extremely advised prior to the installation and updating it to a new version.
In case the user has an older version of the tool installed, they must make sure that it is uninstalled and thoroughly removed.
- It will not support devices older than MI3.
- Mi 2/ Mi 3/ Mi 4/ Mi 4i and Mi 4 C supported.
- Mi 4s and Mi 5 models supported.
- Redmi Note 2 and Note 3 supported.
- Mi Pad model supported.
- Redmi Note 3rd Generation and Note 4th Generation supported.
- Redmi 1/ Redmi 1S and Redmi 2 supported.
- Download the correct Fastboot ROM on the PC after double-checking firmware compatibility with the device. Then proceed to extract and get the workable extensions on to the PC.
- Download Mi Flash Tool from the resources provided and unzip the folder then start the installation by clicking the "exe" file.
- Continue to Browse until the process starts in the tool interface then proceed to attach the custom ROM file.
- Switch the device into the Fastboot mode. Then turn off the device and simply long press and hold the Volume Down keys and Power key.
- Then proceed to connect the device to the PC via a USB cable while the device is in Fastboot mode.
- Now check whether the device is connected through the tool interface. Then select the flashing option from all three “Flash all”, “Flash all except storage” and “Flash all except data and storage” options.
- Flash and wait for a few minutes and once the process is done then users can reboot the device and end the process successfully.