Reset FRP SM-J710F successfully done whit Octoplus Samsug
Welcome to Octoplus/Octopus Box Samsung software version 2.6.1
-----------------------------------------------------------------------------------
To connect SM-J700F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-J710F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for a phone (waiting for ADB device)...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for a phone. Please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Operation was failed!
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.1 Software version.
Selected firmware file: combination_a710f_a710fxxu1apg2_boot.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Selected file is declared for SM-A710F model!
File has been created for a different phone model.
Performed by 2.6.1 Software version.
Selected firmware file: combination_a710f_a710fxxu1aol6_boot.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Selected file is declared for SM-A710F model!
File has been created for a different phone model.
Performed by 2.6.1 Software version.
Selected firmware file: combination_a710f_a710fxxu1apg2_boot.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Selected file is declared for SM-A710F model!
File has been created for a different phone model.
Performed by 2.6.1 Software version.
Selected AP file: D:\1file flash\samsung\J\J710\J710F\Android 6.0.1
\parsi\J710FXXU1API4_J710FOJV1API1_THR\J710FXXU1AP I4
_J710FOJV1API1_J710FXXU1APH4_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing Firmware Failed
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for a phone (waiting for ADB device)...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.1 Software version.
Welcome to Octoplus/Octopus Box Samsung software version 2.6.1
-----------------------------------------------------------------------------------
To connect SM-J700F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-J710F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for a phone (waiting for ADB device)...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for a phone. Please wait...
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Operation was failed!
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.1 Software version.
Selected firmware file: combination_a710f_a710fxxu1apg2_boot.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Selected file is declared for SM-A710F model!
File has been created for a different phone model.
Performed by 2.6.1 Software version.
Selected firmware file: combination_a710f_a710fxxu1aol6_boot.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Selected file is declared for SM-A710F model!
File has been created for a different phone model.
Performed by 2.6.1 Software version.
Selected firmware file: combination_a710f_a710fxxu1apg2_boot.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Selected file is declared for SM-A710F model!
File has been created for a different phone model.
Performed by 2.6.1 Software version.
Selected AP file: D:\1file flash\samsung\J\J710\J710F\Android 6.0.1
\parsi\J710FXXU1API4_J710FOJV1API1_THR\J710FXXU1AP I4
_J710FOJV1API1_J710FXXU1APH4_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J710F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing Firmware Failed
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for a phone (waiting for ADB device)...
Operation was canceled
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-J710F
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.1 Software version.
