How to Fix Error flash that can not be formatted - Surely it will all know what flashdisk, the flash is a device or data storage media is very practical in use by humans because of the small cute and can be brought anywhere. but there are obstacles flashdik I can not be in the format, how to solve it?
flashdiks reformat aims to erase all existing data in order to clean it, the flash format feeding data format or virus in it will be lost, there are several causes flash nah we can not format well this is one of the solutions that we can do. directly refer to the How to Fix Error flash that can not be the following format:
Before performing the following ways should you try to plug in your flash to Windows and other PC installed Windows XP, 7,8 To perform formatting. If you still can not also be done in ways such as the following:
1. Insert stick into the USB port on the laptop / CPU.
2. Click Start and then select RUN.
3. After the RUN display appears type "compmgmt.msc". Type without the quotes.
4. After that will come to a program called "computer management" as shown below:
5. Select storage which is in the middle then select disk management.
6. Here, your flash will be detected.
7. If your flash is detected then right click on the flash that has been detected.
8. Then select "create partition".
9. Then right click select "format".
10. Formatting your flash has finished.
If still can not do:
usually in the format of the flash can not write protection dikarnakan contained therein. then we must menghapunya before can be formatted. try the following tutorial:
flashdiks reformat aims to erase all existing data in order to clean it, the flash format feeding data format or virus in it will be lost, there are several causes flash nah we can not format well this is one of the solutions that we can do. directly refer to the How to Fix Error flash that can not be the following format:
Before performing the following ways should you try to plug in your flash to Windows and other PC installed Windows XP, 7,8 To perform formatting. If you still can not also be done in ways such as the following:
1. Insert stick into the USB port on the laptop / CPU.
2. Click Start and then select RUN.
3. After the RUN display appears type "compmgmt.msc". Type without the quotes.
4. After that will come to a program called "computer management" as shown below:
5. Select storage which is in the middle then select disk management.
6. Here, your flash will be detected.
7. If your flash is detected then right click on the flash that has been detected.
8. Then select "create partition".
9. Then right click select "format".
10. Formatting your flash has finished.
If still can not do:
usually in the format of the flash can not write protection dikarnakan contained therein. then we must menghapunya before can be formatted. try the following tutorial:
- Press Window + R keys simultaneously
- Select the command "regedit" (without the quotes and press enter.
- Then a new dialog box will appear, press Ctrl + F.
- Type the following text "write protected" (without quotation marks) in the searching box, select Find Next and immediately delete it if found information write protected. You do this by right-clicking gave rise to delete messages.
- If the confirmation dialog appears to press OK to approve
- Write protected already erased the code and mobile flashback to the original state.
- Close the Registry Editor dialog, unplug the flash and then restart your computer
- Once the above is completed by way of a perfect repair, usually flash already can be used again as a written code protected ya gone. Such flash still having problems use the second way is to use the software.
