How to create ur tp EDL or Qloader USB cable

[JuliusBajaj]

How to create ur tp EDL or Qloader USB cable

SOME DEVICES CANNOT ENTER THIS MODE WITH THE VOLUME BUTTONS 
like this description...

Power Off Phone, Remove battery, Insert back
PRESS and HOLD BOTH VOLUME KEYS!
Insert USB cable. In some cases require using EDL cable or TP to force EDL mode!
Wait for phone...

you may wait for a month if you don't have EDL cable and you were not able to enter it using combination keys...

NOW ITS TIME TO FORCE ANY PHONE TO ENTER EDL


ALL U NEED IS A USB CABLE AND OLD HANDS-FREE TO CREATE A TP CABLE

1. Peel wire

2. U WILL C 4 WIRES 

RED VBAT
BLACK GND
GREEN D+
WHITE D-

PEEL THE GREEN AND THE BLACK WIRES 

3. SOLDER A TINY BRIDG ON THE BLACK & THE GREEN WIRES 

NOW USE ANY BROKEN HANDS-FREE BUTTON 

4. STICK THE BUTTON ON THE TOP OF UR CABLE WITH GLUE 

5. NOW SOLDER THE 2 BRIDGE IN THE BUTTON 

FINALLY, YOUR CABLE IS REEDY 

TESTED ON XIAOMI, HUAWEI, LENOVO ANY others QUALCOMM Devices.

 

[Prince]

[font=Verdana, Arial, Helvetica, sans-serif]see guide for Mode USB Cable EDL 9008 in COM 9008[/font][font=Verdana, Arial, Helvetica, sans-serif] [/font]
[font=Verdana, Arial, Helvetica, sans-serif]series chips for Qualcomm (Xiaomi, LG, Samsung, ...)[/font][font=Verdana, Arial, Helvetica, sans-serif] [/font]


[font=Verdana, Arial, Helvetica, sans-serif]Prepare[/font][font=Verdana, Arial, Helvetica, sans-serif] [/font]


[font=arial, sans-serif]Cable MicroUSB or USB-C cable
Single switch
Small knife to separate the cable box
Screwdriver to remove switches, ...


Technical explanation:
- The USB cable has 4 microfibres:
VDC (+ 5V), D-, D + and GND -
When the trigger (connector) 2 fibers D + and GND
are connected to the phone, the phone automatically switches to EDL mode On PC COM port driver the studio 9008)[/font]