[size=small][font=verdana, sans-serif]For those who don’t know, SP Flash Tool used to flash, format and read back MTK smartphones.[/font][/size]
[size=small][font=verdana, sans-serif]Here are some errors and solutions associated with SP Flash Tool hope you find them helpful.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_FT_ENABLE_DRAM_FAIL (4032) [/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This sometimes occurs when you are trying to flash a wrong ROM to your device. [/font][/size]
[size=small][font=verdana, sans-serif]If you are sure that the firmware you are using is the exact one of your device, format the phone before you flash it.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_NOT_ENOUGH_STORAGE_SPACE (1011)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This error pops up when size of the firmware (ROM) you are trying to flash is bigger than the space given on the phone.[/font][/size]
[size=small][font=verdana, sans-serif]Try using another version of sp flash tool. Sometimes this error occurs when using a wrong ROM.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_UNSUPPORTED_OPERATION (1040)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]The scatter file loaded is wrong. load the scatter file of your device.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_COM_PORT_OPEN_FAIL (1003)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This error is seen when the com ports on your PC are disabled.[/font][/size]
[size=small][font=verdana, sans-serif]Try enabling com ports in your BIOS[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_COM_PORT_OPEN_FAIL (1013)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This error is just almost like the the 1003 error. Check if your com ports are available if not enable them. But most of the time using a new version of SP Flash Tool solves this problem.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_UNSUPPORTED_VER_OF_DA (1022)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]If you get this error, Use a newer version of SP Flash Tool.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_DA_EXT_RAM_ERROR (3001)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Connection problems. Check USB cord or use another port.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_DA_EMMC_FLASH_NOT_FOUND (3144) [/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Wrong scatter file used[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_FT_DOWNLOAD_FAIL (4008)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Change USB cord or[/font][/size]
[size=small][font=verdana, sans-serif]Use Battery to flash the phone or[/font][/size]
[size=small][font=verdana, sans-serif]Change the version of SP Flash Tool. (Older versions preferable)[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_INVALID_DA_FILE (5002)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Use another version of SP Flash Tool[/font][/size]
[size=small][font=verdana, sans-serif]Here are some errors and solutions associated with SP Flash Tool hope you find them helpful.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_FT_ENABLE_DRAM_FAIL (4032) [/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This sometimes occurs when you are trying to flash a wrong ROM to your device. [/font][/size]
[size=small][font=verdana, sans-serif]If you are sure that the firmware you are using is the exact one of your device, format the phone before you flash it.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_NOT_ENOUGH_STORAGE_SPACE (1011)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This error pops up when size of the firmware (ROM) you are trying to flash is bigger than the space given on the phone.[/font][/size]
[size=small][font=verdana, sans-serif]Try using another version of sp flash tool. Sometimes this error occurs when using a wrong ROM.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_UNSUPPORTED_OPERATION (1040)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]The scatter file loaded is wrong. load the scatter file of your device.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_COM_PORT_OPEN_FAIL (1003)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This error is seen when the com ports on your PC are disabled.[/font][/size]
[size=small][font=verdana, sans-serif]Try enabling com ports in your BIOS[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_COM_PORT_OPEN_FAIL (1013)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]This error is just almost like the the 1003 error. Check if your com ports are available if not enable them. But most of the time using a new version of SP Flash Tool solves this problem.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_UNSUPPORTED_VER_OF_DA (1022)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]If you get this error, Use a newer version of SP Flash Tool.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_DA_EXT_RAM_ERROR (3001)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Connection problems. Check USB cord or use another port.[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_DA_EMMC_FLASH_NOT_FOUND (3144) [/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Wrong scatter file used[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_FT_DOWNLOAD_FAIL (4008)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Change USB cord or[/font][/size]
[size=small][font=verdana, sans-serif]Use Battery to flash the phone or[/font][/size]
[size=small][font=verdana, sans-serif]Change the version of SP Flash Tool. (Older versions preferable)[/font][/size]
[size=small][font=verdana, sans-serif][size=small][font=verdana, sans-serif]S_INVALID_DA_FILE (5002)[/font][/size][/font][/size]
[size=small][font=verdana, sans-serif]Use another version of SP Flash Tool[/font][/size]
